Monthly Archives: September 2015

How to Generate Gerber Files for Seeed Studio’s Fusion PCB Service

More a note to myself, but you may find this useful, too. Eagle design rules and cam job files Fusion PCB Order Submission Guidelines Next, unzip/runrar and move to eagle: $ mv SeeedStudio_2layer_DRU_no_angle_20140221.dru SeeedStudio_4layer_DRU_no_angle_20140221.dru \ /Applications/EAGLE-6.5.0/dru $ mv \ … Continue reading

Posted in eagle, pcb | Leave a comment

3.5mm audio jack breakout board

None of the 3.5mm audio jacks I know of fit on a standard breadboard. For my previous project I made a breakout board for the “Lumberg KLBR4” audio jack to address this. You can buy those jacks for example at Reichelt. Eagle files:

Posted in breakout | Leave a comment